Model No.: ADSS
ADSS Cable is loose tube stranded. Fibers, 250 um, are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes(and fillers) are stranded around a FRP(Fiber Reinforce Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. It is covered with thin PE(polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT(anti-tracking) outer sheath.
Can be installed without shutting off the power
Excellent AT performance. The maximum inductive at the operating point of AT sheath can reach 25KV
Light weight and small diameter reducing the load caused by ice and wind and the load on towers and back props
Large span lengths and the largest span is over 1000m
Good performance of tensile strength and temperature
The design life span is 30 years
Fiber Type:G.652, G.655 or 6.657 single-mode fiber. A1a or A1b, OM3 or OM4 mufti-mode fiber, or other types of fiber;
Cable Dimension: The nominal cable dimension, or other contracted dimension;
Delivery Length: 1 km or 2km, or other contracted length;
Other Requirements: Other contracted special requests.
|Max. Tension Load||N||Installation:6300|
|() Min. Bend Radius(Dynamic)||mm||20D|
|() Min. Bend Radius(Static)||mm||10D|
Contact us if you need more details on ADSS Cable. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Fiber ADSS、ADSS Fiber Optic Cable. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Outdoor Optic Fiber Cable
Premium Related Products