10/100M Fiber Optic Media Converter singlemode single fiber FC port 20km

10/100M Fiber Optic Media Converter
1.CE, ROHS certificate.
2.Internal power supplier.
3.high reliability.   Product introduction Media converter is a phototelectricy transformation device ,which transfer ethernet electrical signal to optical signal or transfer optical signal to ethernet electrical signal,through converting the electrical signal to optical signal and then transmit them over multimode or single mode optical fiber. It breaks through the restriction of short distance transmision of cable, combining with the optical fiber. it makes us realize the long distance transmission of kilometers or even hundredkilometers, under the precondition of guaranting the transmission of ethernet higher bandwidth channel. You will save many investments in the network if you using the optical fiber to construct net. it is a good solution to use optical fiber transceiver to solve current state of network, which is the expensive network equipment, optical fiber transmission is the ideal fiber optical transmission equipment of telecommunication, radio and television industry.   Features · Supports auto MDI/MDIX crossover · 1K MAC address can be storage, and automatic updated · Supports 10/100M, full/half duplex auto- negotiation · Comply with IEEE 802.1Q VLAN TAG, Spanning Tree standard · More than 50,000 hours MTBF · Supports over-sized packets up to 1552Bytes · Full duplex-flow control, Half duplex-back pressure · Link fault pass through function · Full-positioned LEDs to indicate power and network status · Same card on rack mounted and desktop · FCC part 15 Class A, CISPR Class A, VCCI Class A, CE Mark · Throughput @ 1000Base: 148,8000 pps (64-byte packets) · Single mode, single fiber · Transmission distance is from 2KM up to 100KM · Network broadcast storm protection function · High quality optical modules and chips with working stability     Specifications

Standard
IEEE802.3 (10BASE-T) IEEE802.3u 100BASE-TX/FX (Fast-Ethernet) IEEE802.3x (Flow Control) IEEE802.1q, IEEE802.1p QoS, IEEE802.1d Spanning Tree
Fiber Connector
FC
10/100BASE-T
STP or UTP Category 5/5e/6 cable (Max. 100m)
100BASE-FX
Singlemode fiber cable (20/40/60/80/100/120Km)
Conversion Mode / Delay Time
Store-and-Forward < 10us, straight-through<0.9us
Flow control
Full duplex-flow control, Half duplex-back pressure
MTBF
50,000 hours
RJ-45 Port	Auto-MDI/MDIX
Dimensions	Inner-power:140mm*110mm*30mm
Weight	Inner-power: 0.6KG
Input Voltage
Input Voltage	AC100 ~ 240V / 50-60HZ (OM)
Wavelength	1310nm / 1550nm
Power Consumption	<2.5W
BER	<1/1000000000
Operation Temperature	0°C~50°C
Storage Temperature	-40°C~70°C
Storage Humidity	5%~90% non-condescending
MAC Address Table	1K
Buffer Size	1M

    Performances and features:
1. Intelligent transportation supervisory system(ITS)
2. High-speed Way supervisory/Tele-Communication System)
3. Large corporations, network security monitoring system, multi-function system
4. Long-distance Muti-media Schooling, Campus monitoring, long-distance broadcast television transmission system  

Contact us if you need more details on 10/100m Fc Sm Single Fiber Media Converter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Sm Simplex 10/100m 20km Fc Media Converter、Sm Simplex Fc 10/100m Media Converter. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Media Converter